vitastor/docs/usage/qemu.en.md

Documentation → Usage → QEMU and qemu-img

---

Читать на русском

QEMU and qemu-img

QEMU

You need patched QEMU version to use Vitastor driver. Pre-built packages are available.

To start a VM using plain QEMU command-line with Vitastor disk, use the following commands:

Old syntax (-drive):

qemu-system-x86_64 -enable-kvm -m 1024 \
    -drive 'file=vitastor:image=debian9',
        format=raw,if=none,id=drive-virtio-disk0,cache=none \
    -device 'virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,
        id=virtio-disk0,bootindex=1,write-cache=off' \
    -vnc 0.0.0.0:0

Etcd address may be specified explicitly by adding :etcd_host=192.168.7.2\:2379/v3 to file=. Configuration file path may be overriden by adding :config_path=/etc/vitastor/vitastor.conf.

New syntax (-blockdev):

qemu-system-x86_64 -enable-kvm -m 1024 \
    -blockdev '{"node-name":"drive-virtio-disk0","driver":"vitastor","image":"debian9",
        "cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
    -device 'virtio-blk-pci,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,
        id=virtio-disk0,bootindex=1,write-cache=off' \
    -vnc 0.0.0.0:0

With a separate I/O thread:

qemu-system-x86_64 -enable-kvm -m 1024 \
    -object iothread,id=vitastor1 \
    -blockdev '{"node-name":"drive-virtio-disk0","driver":"vitastor","image":"debian9",
        "cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
    -device 'virtio-blk-pci,iothread=vitastor1,scsi=off,bus=pci.0,addr=0x5,drive=drive-virtio-disk0,
        id=virtio-disk0,bootindex=1,write-cache=off' \
    -vnc 0.0.0.0:0

You can also specify inode ID, pool and size manually instead of :image=<IMAGE> option: :pool=<POOL>:inode=<INODE>:size=<SIZE>.

qemu-img

For qemu-img, you should use vitastor:image=<IMAGE>[:etcd_host=<HOST>] as filename.

For example, to upload a VM image into Vitastor, run:

qemu-img convert -f qcow2 debian10.qcow2 -p -O raw 'vitastor:image=debian10'

You can also specify :pool=<POOL>:inode=<INODE>:size=<SIZE> instead of :image=<IMAGE> if you don't want to use inode metadata.

Exporting snapshots

Starting with 0.8.4, you can also export individual layers (snapshot diffs) using qemu-img.

Suppose you have an image testimg and a snapshot testimg@0 created with vitastor-cli snap-create testimg@0.

Then you can export the testimg@0 snapshot and the data written to testimg after creating the snapshot separately using the following commands (key points are using skip-parents=1 and -B backing_file option):

qemu-img convert -f raw 'vitastor:image=testimg@0' \
    -O qcow2 testimg_0.qcow2

qemu-img convert -f raw 'vitastor:image=testimg:skip-parents=1' \
    -O qcow2 -o 'cluster_size=4k' -B testimg_0.qcow2 testimg.qcow2

In fact, with cluster_size=4k any QCOW2 file can be used instead -B testimg_0.qcow2, even an empty one.

QCOW2 cluster_size=4k option is required if you want testimg.qcow2 to contain only the data overwritten exactly in the child layer. With the default 64 KB QCOW2 cluster size you'll get a bit of extra data from parent layers, i.e. a 4 KB overwrite will result in testimg.qcow2 containing 64 KB of data. And this extra data will be taken by qemu-img from the file passed in -B option, so you really need 4 KB cluster if you use an empty image in -B.

After this procedure you'll get two chained QCOW2 images. To detach testimg.qcow2 from its parent, run:

qemu-img rebase -u -b '' testimg.qcow2

This can be used for backups. Just note that exporting an image that is currently being written to is of course unsafe and doesn't produce a consistent result, so only export snapshots if you do this on a live VM.

vhost-user-blk

QEMU, starting with 6.0, includes support for attaching disks via a separate userspace worker process, called vhost-user-blk. It usually has slightly (20-30 us) lower latency.

Example commands to use it with Vitastor:

qemu-storage-daemon \
    --daemonize \
    --blockdev '{"node-name":"drive-virtio-disk1","driver":"vitastor","image":"testosd1","cache":{"direct":true,"no-flush":false},"auto-read-only":true,"discard":"unmap"}' \
    --export type=vhost-user-blk,id=vitastor1,node-name=drive-virtio-disk1,addr.type=unix,addr.path=/run/vitastor1-user-blk.sock,writable=on,num-queues=1

qemu-system-x86_64 -enable-kvm -m 2048 -M accel=kvm,memory-backend=mem \
    -object memory-backend-memfd,id=mem,size=2G,share=on \
    -chardev socket,id=vitastor1,reconnect=1,path=/run/vitastor1-user-blk.sock \
    -device vhost-user-blk-pci,chardev=vitastor1,num-queues=1,config-wce=off \
    -vnc 0.0.0.0:0

memfd memory-backend is crucial, vhost-user-blk does not work without it.

VDUSE

Linux kernel, starting with version 5.15, supports a new interface for attaching virtual disks to the host - VDUSE (vDPA Device in Userspace). QEMU, starting with 7.2, has support for exporting QEMU block devices over this protocol using qemu-storage-daemon.

VDUSE is currently the best interface to attach Vitastor disks as kernel devices because:

• It avoids data copies and thus achieves much better performance than NBD
• It doesn't have NBD timeout problem - the device doesn't die if an operation executes for too long
• It doesn't have hung device problem - if the userspace process dies it can be restarted (!) and block device will continue operation
• It doesn't seem to have the device number limit

Example performance comparison:

	direct fio	NBD	VDUSE
linear write	3.85 GB/s	1.12 GB/s	3.85 GB/s
4k random write Q128	240000 iops	120000 iops	178000 iops
4k random write Q1	9500 iops	7620 iops	7640 iops
linear read	4.3 GB/s	1.8 GB/s	2.85 GB/s
4k random read Q128	287000 iops	140000 iops	189000 iops
4k random read Q1	9600 iops	7640 iops	7780 iops

To try VDUSE you need at least Linux 5.15, built with VDUSE support (CONFIG_VDPA=m, CONFIG_VDPA_USER=m, CONFIG_VIRTIO_VDPA=m).

Debian Linux kernels have these options disabled by now, so if you want to try it on Debian, use a kernel from Ubuntu kernel-ppa/mainline, Proxmox, or build modules for Debian kernel manually:

mkdir build
cd build
apt-get install linux-headers-`uname -r`
apt-get build-dep linux-image-`uname -r`-unsigned
apt-get source linux-image-`uname -r`-unsigned
cd linux*/drivers/vdpa
make -C /lib/modules/`uname -r`/build M=$PWD CONFIG_VDPA=m CONFIG_VDPA_USER=m CONFIG_VIRTIO_VDPA=m -j8 modules modules_install
cat Module.symvers >> /lib/modules/`uname -r`/build/Module.symvers
cd ../virtio
make -C /lib/modules/`uname -r`/build M=$PWD CONFIG_VDPA=m CONFIG_VDPA_USER=m CONFIG_VIRTIO_VDPA=m -j8 modules modules_install
depmod -a

You also need vdpa tool from the iproute2 package.

Commands to attach Vitastor image as a VDUSE device:

modprobe vduse
modprobe virtio-vdpa
qemu-storage-daemon --daemonize --blockdev '{"node-name":"test1","driver":"vitastor",\
  "etcd-host":"192.168.7.2:2379/v3","image":"testosd1","cache":{"direct":true,"no-flush":false},"discard":"unmap"}' \
  --export vduse-blk,id=test1,node-name=test1,name=test1,num-queues=16,queue-size=128,writable=true
vdpa dev add name test1 mgmtdev vduse

After running these commands, /dev/vda device will appear in the system and you'll be able to use it as a normal disk.

To remove the device:

vdpa dev del test1
kill <qemu-storage-daemon_process_PID>