Add Ceph EC 2+1 test results

v0.4.0
Vitaliy Filippov 2020-11-01 14:13:35 +03:00
vanhempi 824ea507d0
commit 3b7279b376
1 muutettua tiedostoa jossa 11 lisäystä ja 3 poistoa

Näytä tiedosto

@ -153,9 +153,9 @@ I use the following 6 commands with small variations to benchmark any storage:
`fio -ioengine=libaio -direct=1 -invalidate=1 -name=test -bs=4M -iodepth=32 -rw=write -runtime=60 -filename=/dev/sdX`
- Linear read:
`fio -ioengine=libaio -direct=1 -invalidate=1 -name=test -bs=4M -iodepth=32 -rw=read -runtime=60 -filename=/dev/sdX`
- Random write latency (this hurts storages the most):
- Random write latency (T1Q1, this hurts storages the most):
`fio -ioengine=libaio -direct=1 -invalidate=1 -name=test -bs=4k -iodepth=1 -fsync=1 -rw=randwrite -runtime=60 -filename=/dev/sdX`
- Random read latency:
- Random read latency (T1Q1):
`fio -ioengine=libaio -direct=1 -invalidate=1 -name=test -bs=4k -iodepth=1 -rw=randread -runtime=60 -filename=/dev/sdX`
- Parallel write iops (use numjobs if a single CPU core is insufficient to saturate the load):
`fio -ioengine=libaio -direct=1 -invalidate=1 -name=test -bs=4k -iodepth=128 [-numjobs=4 -group_reporting] -rw=randwrite -runtime=60 -filename=/dev/sdX`
@ -206,7 +206,7 @@ Hardware configuration: 4 nodes, each with:
CPU powersaving was disabled. Both Vitastor and Ceph were configured with 2 OSDs per 1 SSD.
All of the results below apply to 4 KB blocks.
All of the results below apply to 4 KB blocks and random access (unless indicated otherwise).
Raw drive performance:
- T1Q1 write ~27000 iops (~0.037ms latency)
@ -258,6 +258,14 @@ Vitastor:
- Linear write (4M T1Q32): 3200 MB/s
- Linear read (4M T1Q32): 1800 MB/s
Ceph:
- T1Q1 write: 730 iops (~1.37ms latency)
- T1Q1 read: 1500 iops with cold cache (~0.66ms latency), 2300 iops after 2 minute metadata cache warmup (~0.435ms latency)
- T4Q128 write (4 RBD images): 45300 iops, total CPU usage by OSDs about 30 virtual cores on each node
- T8Q64 read (4 RBD images): 278600 iops, total CPU usage by OSDs about 40 virtual cores on each node
- Linear write (4M T1Q32): 1950 MB/s before preallocation, 2500 MB/s after preallocation
- Linear read (4M T1Q32): 2400 MB/s
### NBD
NBD is currently required to mount Vitastor via kernel, but it imposes additional overhead