Browse Source

Add optimized crc32c

blocking-uring-test
Vitaliy Filippov 2 years ago
parent
commit
d0fdcbd7ff
  1. 4
      blockstore_journal.h
  2. 466
      crc32c.c
  3. 3
      crc32c.h

4
blockstore_journal.h

@ -40,6 +40,7 @@ struct __attribute__((__packed__)) journal_entry_small_write
// small_write entries contain <len> bytes of data which is stored in next sectors
// data_offset is its offset within journal
uint64_t data_offset;
// FIXME add & verify data crc32c
};
struct __attribute__((__packed__)) journal_entry_big_write
@ -98,7 +99,8 @@ struct __attribute__((__packed__)) journal_entry
inline uint32_t je_crc32(journal_entry *je)
{
return crc32c_zero4(((uint8_t*)je)+4, je->size-4);
// 0x48674bc7 = crc32(4 zero bytes)
return crc32c(0x48674bc7, ((uint8_t*)je)+4, je->size-4);
}
struct journal_sector_info_t

466
crc32c.c

@ -1,113 +1,367 @@
/* crc32c.c -- compute CRC-32C using the Intel crc32 instruction
* Copyright (C) 2013 Mark Adler
* Version 1.1 1 Aug 2013 Mark Adler
*/
/*
This software is provided 'as-is', without any express or implied
warranty. In no event will the author be held liable for any damages
arising from the use of this software.
Permission is granted to anyone to use this software for any purpose,
including commercial applications, and to alter it and redistribute it
freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must not
claim that you wrote the original software. If you use this software
in a product, an acknowledgment in the product documentation would be
appreciated but is not required.
2. Altered source versions must be plainly marked as such, and must not be
misrepresented as being the original software.
3. This notice may not be removed or altered from any source distribution.
Mark Adler
madler@alumni.caltech.edu
*/
/* Use hardware CRC instruction on Intel SSE 4.2 processors. This computes a
CRC-32C, *not* the CRC-32 used by Ethernet and zip, gzip, etc. A software
version is provided as a fall-back, as well as for speed comparisons. */
/* Version history:
1.0 10 Feb 2013 First version
1.1 1 Aug 2013 Correct comments on why three crc instructions in parallel
*/
#include <stdio.h>
#include <stdlib.h>
#include <stdint.h>
#include <unistd.h>
#include "crc32c.h"
/*****************************************************************/
/* */
/* CRC LOOKUP TABLE */
/* ================ */
/* The following CRC lookup table was generated automagically */
/* by the Rocksoft^tm Model CRC Algorithm Table Generation */
/* Program V1.0 using the following model parameters: */
/* */
/* Width : 4 bytes. */
/* Poly : 0x1EDC6F41L */
/* Reverse : TRUE. */
/* */
/* For more information on the Rocksoft^tm Model CRC Algorithm, */
/* see the document titled "A Painless Guide to CRC Error */
/* Detection Algorithms" by Ross Williams */
/* (ross@guest.adelaide.edu.au.). This document is likely to be */
/* in the FTP archive "ftp.adelaide.edu.au/pub/rocksoft". */
/* */
/*****************************************************************/
uint32_t crctable[256] = {
0x00000000L, 0xF26B8303L, 0xE13B70F7L, 0x1350F3F4L,
0xC79A971FL, 0x35F1141CL, 0x26A1E7E8L, 0xD4CA64EBL,
0x8AD958CFL, 0x78B2DBCCL, 0x6BE22838L, 0x9989AB3BL,
0x4D43CFD0L, 0xBF284CD3L, 0xAC78BF27L, 0x5E133C24L,
0x105EC76FL, 0xE235446CL, 0xF165B798L, 0x030E349BL,
0xD7C45070L, 0x25AFD373L, 0x36FF2087L, 0xC494A384L,
0x9A879FA0L, 0x68EC1CA3L, 0x7BBCEF57L, 0x89D76C54L,
0x5D1D08BFL, 0xAF768BBCL, 0xBC267848L, 0x4E4DFB4BL,
0x20BD8EDEL, 0xD2D60DDDL, 0xC186FE29L, 0x33ED7D2AL,
0xE72719C1L, 0x154C9AC2L, 0x061C6936L, 0xF477EA35L,
0xAA64D611L, 0x580F5512L, 0x4B5FA6E6L, 0xB93425E5L,
0x6DFE410EL, 0x9F95C20DL, 0x8CC531F9L, 0x7EAEB2FAL,
0x30E349B1L, 0xC288CAB2L, 0xD1D83946L, 0x23B3BA45L,
0xF779DEAEL, 0x05125DADL, 0x1642AE59L, 0xE4292D5AL,
0xBA3A117EL, 0x4851927DL, 0x5B016189L, 0xA96AE28AL,
0x7DA08661L, 0x8FCB0562L, 0x9C9BF696L, 0x6EF07595L,
0x417B1DBCL, 0xB3109EBFL, 0xA0406D4BL, 0x522BEE48L,
0x86E18AA3L, 0x748A09A0L, 0x67DAFA54L, 0x95B17957L,
0xCBA24573L, 0x39C9C670L, 0x2A993584L, 0xD8F2B687L,
0x0C38D26CL, 0xFE53516FL, 0xED03A29BL, 0x1F682198L,
0x5125DAD3L, 0xA34E59D0L, 0xB01EAA24L, 0x42752927L,
0x96BF4DCCL, 0x64D4CECFL, 0x77843D3BL, 0x85EFBE38L,
0xDBFC821CL, 0x2997011FL, 0x3AC7F2EBL, 0xC8AC71E8L,
0x1C661503L, 0xEE0D9600L, 0xFD5D65F4L, 0x0F36E6F7L,
0x61C69362L, 0x93AD1061L, 0x80FDE395L, 0x72966096L,
0xA65C047DL, 0x5437877EL, 0x4767748AL, 0xB50CF789L,
0xEB1FCBADL, 0x197448AEL, 0x0A24BB5AL, 0xF84F3859L,
0x2C855CB2L, 0xDEEEDFB1L, 0xCDBE2C45L, 0x3FD5AF46L,
0x7198540DL, 0x83F3D70EL, 0x90A324FAL, 0x62C8A7F9L,
0xB602C312L, 0x44694011L, 0x5739B3E5L, 0xA55230E6L,
0xFB410CC2L, 0x092A8FC1L, 0x1A7A7C35L, 0xE811FF36L,
0x3CDB9BDDL, 0xCEB018DEL, 0xDDE0EB2AL, 0x2F8B6829L,
0x82F63B78L, 0x709DB87BL, 0x63CD4B8FL, 0x91A6C88CL,
0x456CAC67L, 0xB7072F64L, 0xA457DC90L, 0x563C5F93L,
0x082F63B7L, 0xFA44E0B4L, 0xE9141340L, 0x1B7F9043L,
0xCFB5F4A8L, 0x3DDE77ABL, 0x2E8E845FL, 0xDCE5075CL,
0x92A8FC17L, 0x60C37F14L, 0x73938CE0L, 0x81F80FE3L,
0x55326B08L, 0xA759E80BL, 0xB4091BFFL, 0x466298FCL,
0x1871A4D8L, 0xEA1A27DBL, 0xF94AD42FL, 0x0B21572CL,
0xDFEB33C7L, 0x2D80B0C4L, 0x3ED04330L, 0xCCBBC033L,
0xA24BB5A6L, 0x502036A5L, 0x4370C551L, 0xB11B4652L,
0x65D122B9L, 0x97BAA1BAL, 0x84EA524EL, 0x7681D14DL,
0x2892ED69L, 0xDAF96E6AL, 0xC9A99D9EL, 0x3BC21E9DL,
0xEF087A76L, 0x1D63F975L, 0x0E330A81L, 0xFC588982L,
0xB21572C9L, 0x407EF1CAL, 0x532E023EL, 0xA145813DL,
0x758FE5D6L, 0x87E466D5L, 0x94B49521L, 0x66DF1622L,
0x38CC2A06L, 0xCAA7A905L, 0xD9F75AF1L, 0x2B9CD9F2L,
0xFF56BD19L, 0x0D3D3E1AL, 0x1E6DCDEEL, 0xEC064EEDL,
0xC38D26C4L, 0x31E6A5C7L, 0x22B65633L, 0xD0DDD530L,
0x0417B1DBL, 0xF67C32D8L, 0xE52CC12CL, 0x1747422FL,
0x49547E0BL, 0xBB3FFD08L, 0xA86F0EFCL, 0x5A048DFFL,
0x8ECEE914L, 0x7CA56A17L, 0x6FF599E3L, 0x9D9E1AE0L,
0xD3D3E1ABL, 0x21B862A8L, 0x32E8915CL, 0xC083125FL,
0x144976B4L, 0xE622F5B7L, 0xF5720643L, 0x07198540L,
0x590AB964L, 0xAB613A67L, 0xB831C993L, 0x4A5A4A90L,
0x9E902E7BL, 0x6CFBAD78L, 0x7FAB5E8CL, 0x8DC0DD8FL,
0xE330A81AL, 0x115B2B19L, 0x020BD8EDL, 0xF0605BEEL,
0x24AA3F05L, 0xD6C1BC06L, 0xC5914FF2L, 0x37FACCF1L,
0x69E9F0D5L, 0x9B8273D6L, 0x88D28022L, 0x7AB90321L,
0xAE7367CAL, 0x5C18E4C9L, 0x4F48173DL, 0xBD23943EL,
0xF36E6F75L, 0x0105EC76L, 0x12551F82L, 0xE03E9C81L,
0x34F4F86AL, 0xC69F7B69L, 0xD5CF889DL, 0x27A40B9EL,
0x79B737BAL, 0x8BDCB4B9L, 0x988C474DL, 0x6AE7C44EL,
0xBE2DA0A5L, 0x4C4623A6L, 0x5F16D052L, 0xAD7D5351L
};
uint32_t crc32c(uint8_t *buf, int len)
/* CRC-32C (iSCSI) polynomial in reversed bit order. */
#define POLY 0x82f63b78
/* Table for a quadword-at-a-time software crc. */
static __thread int crc32_sw_init = 0;
static uint32_t crc32c_table[8][256];
/* Construct table for software CRC-32C calculation. */
static void crc32c_init_sw(void)
{
uint32_t n, crc, k;
crc32_sw_init = 1;
for (n = 0; n < 256; n++)
{
crc = n;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc = crc & 1 ? (crc >> 1) ^ POLY : crc >> 1;
crc32c_table[0][n] = crc;
}
for (n = 0; n < 256; n++)
{
crc = crc32c_table[0][n];
for (k = 1; k < 8; k++)
{
crc = crc32c_table[0][crc & 0xff] ^ (crc >> 8);
crc32c_table[k][n] = crc;
}
}
}
/* Table-driven software version as a fall-back. This is about 15 times slower
than using the hardware instructions. This assumes little-endian integers,
as is the case on Intel processors that the assembler code here is for. */
static uint32_t crc32c_sw(uint32_t crci, const void *buf, size_t len)
{
const unsigned char *next = (const unsigned char*)buf;
uint64_t crc;
if (!crc32_sw_init)
crc32c_init_sw();
crc = crci ^ 0xffffffff;
while (len && ((uintptr_t)next & 7) != 0)
{
crc = crc32c_table[0][(crc ^ *next++) & 0xff] ^ (crc >> 8);
len--;
}
while (len >= 8)
{
crc ^= *(uint64_t *)next;
crc = crc32c_table[7][crc & 0xff] ^
crc32c_table[6][(crc >> 8) & 0xff] ^
crc32c_table[5][(crc >> 16) & 0xff] ^
crc32c_table[4][(crc >> 24) & 0xff] ^
crc32c_table[3][(crc >> 32) & 0xff] ^
crc32c_table[2][(crc >> 40) & 0xff] ^
crc32c_table[1][(crc >> 48) & 0xff] ^
crc32c_table[0][crc >> 56];
next += 8;
len -= 8;
}
while (len)
{
crc = crc32c_table[0][(crc ^ *next++) & 0xff] ^ (crc >> 8);
len--;
}
return (uint32_t)crc ^ 0xffffffff;
}
/* Multiply a matrix times a vector over the Galois field of two elements,
GF(2). Each element is a bit in an unsigned integer. mat must have at
least as many entries as the power of two for most significant one bit in
vec. */
static inline uint32_t gf2_matrix_times(uint32_t *mat, uint32_t vec)
{
uint32_t sum;
sum = 0;
while (vec)
{
if (vec & 1)
sum ^= *mat;
vec >>= 1;
mat++;
}
return sum;
}
/* Multiply a matrix by itself over GF(2). Both mat and square must have 32
rows. */
static inline void gf2_matrix_square(uint32_t *square, uint32_t *mat)
{
int n;
for (n = 0; n < 32; n++)
square[n] = gf2_matrix_times(mat, mat[n]);
}
/* Construct an operator to apply len zeros to a crc. len must be a power of
two. If len is not a power of two, then the result is the same as for the
largest power of two less than len. The result for len == 0 is the same as
for len == 1. A version of this routine could be easily written for any
len, but that is not needed for this application. */
static void crc32c_zeros_op(uint32_t *even, size_t len)
{
int n;
uint32_t row;
uint32_t odd[32]; /* odd-power-of-two zeros operator */
/* put operator for one zero bit in odd */
odd[0] = POLY; /* CRC-32C polynomial */
row = 1;
for (n = 1; n < 32; n++)
{
odd[n] = row;
row <<= 1;
}
/* put operator for two zero bits in even */
gf2_matrix_square(even, odd);
/* put operator for four zero bits in odd */
gf2_matrix_square(odd, even);
/* first square will put the operator for one zero byte (eight zero bits),
in even -- next square puts operator for two zero bytes in odd, and so
on, until len has been rotated down to zero */
do
{
gf2_matrix_square(even, odd);
len >>= 1;
if (len == 0)
return;
gf2_matrix_square(odd, even);
len >>= 1;
} while (len);
/* answer ended up in odd -- copy to even */
for (n = 0; n < 32; n++)
even[n] = odd[n];
}
/* Take a length and build four lookup tables for applying the zeros operator
for that length, byte-by-byte on the operand. */
static void crc32c_zeros(uint32_t zeros[][256], size_t len)
{
uint32_t n;
uint32_t op[32];
crc32c_zeros_op(op, len);
for (n = 0; n < 256; n++)
{
zeros[0][n] = gf2_matrix_times(op, n);
zeros[1][n] = gf2_matrix_times(op, n << 8);
zeros[2][n] = gf2_matrix_times(op, n << 16);
zeros[3][n] = gf2_matrix_times(op, n << 24);
}
}
/* Apply the zeros operator table to crc. */
static inline uint32_t crc32c_shift(uint32_t zeros[][256], uint32_t crc)
{
return zeros[0][crc & 0xff] ^ zeros[1][(crc >> 8) & 0xff] ^
zeros[2][(crc >> 16) & 0xff] ^ zeros[3][crc >> 24];
}
/* Block sizes for three-way parallel crc computation. LONG and SHORT must
both be powers of two. The associated string constants must be set
accordingly, for use in constructing the assembler instructions. */
#define LONG 8192
#define LONGx1 "8192"
#define LONGx2 "16384"
#define SHORT 256
#define SHORTx1 "256"
#define SHORTx2 "512"
/* Tables for hardware crc that shift a crc by LONG and SHORT zeros. */
static __thread int crc32c_hw_init = 0;
static uint32_t crc32c_long[4][256];
static uint32_t crc32c_short[4][256];
/* Initialize tables for shifting crcs. */
static void crc32c_init_hw(void)
{
uint32_t crc = 0xffffffff;
while (len-- > 0)
{
crc = (crc>>8) ^ crctable[(crc ^ (*buf++)) & 0xFF];
}
return crc^0xffffffff;
crc32c_hw_init = 1;
crc32c_zeros(crc32c_long, LONG);
crc32c_zeros(crc32c_short, SHORT);
}
uint32_t crc32c_zero4(uint8_t *buf, int len)
/* Compute CRC-32C using the Intel hardware instruction. */
static uint32_t crc32c_hw(uint32_t crc, const void *buf, size_t len)
{
uint32_t crc = 0xffffffff;
// pretend that first 4 bytes are zero
crc = (crc>>8) ^ crctable[(crc ^ 0) & 0xFF];
crc = (crc>>8) ^ crctable[(crc ^ 0) & 0xFF];
crc = (crc>>8) ^ crctable[(crc ^ 0) & 0xFF];
crc = (crc>>8) ^ crctable[(crc ^ 0) & 0xFF];
while (len-- > 0)
{
crc = (crc>>8) ^ crctable[(crc ^ (*buf++)) & 0xFF];
}
return crc^0xffffffff;
const unsigned char *next = (const unsigned char*)buf;
const unsigned char *end;
uint64_t crc0, crc1, crc2; /* need to be 64 bits for crc32q */
/* populate shift tables the first time through */
if (!crc32c_hw_init)
crc32c_init_hw();
/* pre-process the crc */
crc0 = crc ^ 0xffffffff;
/* compute the crc for up to seven leading bytes to bring the data pointer
to an eight-byte boundary */
while (len && ((uintptr_t)next & 7) != 0)
{
__asm__(
"crc32b\t" "(%1), %0"
: "=r"(crc0)
: "r"(next), "0"(crc0)
);
next++;
len--;
}
/* compute the crc on sets of LONG*3 bytes, executing three independent crc
instructions, each on LONG bytes -- this is optimized for the Nehalem,
Westmere, Sandy Bridge, and Ivy Bridge architectures, which have a
throughput of one crc per cycle, but a latency of three cycles */
while (len >= LONG*3)
{
crc1 = 0;
crc2 = 0;
end = next + LONG;
do
{
__asm__(
"crc32q\t" "(%3), %0\n\t"
"crc32q\t" LONGx1 "(%3), %1\n\t"
"crc32q\t" LONGx2 "(%3), %2"
: "=r"(crc0), "=r"(crc1), "=r"(crc2)
: "r"(next), "0"(crc0), "1"(crc1), "2"(crc2)
);
next += 8;
} while (next < end);
crc0 = crc32c_shift(crc32c_long, crc0) ^ crc1;
crc0 = crc32c_shift(crc32c_long, crc0) ^ crc2;
next += LONG*2;
len -= LONG*3;
}
/* do the same thing, but now on SHORT*3 blocks for the remaining data less
than a LONG*3 block */
while (len >= SHORT*3)
{
crc1 = 0;
crc2 = 0;
end = next + SHORT;
do
{
__asm__(
"crc32q\t" "(%3), %0\n\t"
"crc32q\t" SHORTx1 "(%3), %1\n\t"
"crc32q\t" SHORTx2 "(%3), %2"
: "=r"(crc0), "=r"(crc1), "=r"(crc2)
: "r"(next), "0"(crc0), "1"(crc1), "2"(crc2)
);
next += 8;
} while (next < end);
crc0 = crc32c_shift(crc32c_short, crc0) ^ crc1;
crc0 = crc32c_shift(crc32c_short, crc0) ^ crc2;
next += SHORT*2;
len -= SHORT*3;
}
/* compute the crc on the remaining eight-byte units less than a SHORT*3
block */
end = next + (len - (len & 7));
while (next < end)
{
__asm__(
"crc32q\t" "(%1), %0"
: "=r"(crc0)
: "r"(next), "0"(crc0)
);
next += 8;
}
len &= 7;
/* compute the crc for up to seven trailing bytes */
while (len)
{
__asm__(
"crc32b\t" "(%1), %0"
: "=r"(crc0)
: "r"(next), "0"(crc0)
);
next++;
len--;
}
/* return a post-processed crc */
return (uint32_t)crc0 ^ 0xffffffff;
}
/* Check for SSE 4.2. SSE 4.2 was first supported in Nehalem processors
introduced in November, 2008. This does not check for the existence of the
cpuid instruction itself, which was introduced on the 486SL in 1992, so this
will fail on earlier x86 processors. cpuid works on all Pentium and later
processors. */
#define SSE42(have) \
do { \
uint32_t eax, ecx; \
eax = 1; \
__asm__("cpuid" \
: "=c"(ecx) \
: "a"(eax) \
: "%ebx", "%edx"); \
(have) = (ecx >> 20) & 1; \
} while (0)
/* Compute a CRC-32C. If the crc32 instruction is available, use the hardware
version. Otherwise, use the software version. */
uint32_t crc32c(uint32_t crc, const void *buf, size_t len)
{
int sse42;
SSE42(sse42);
return sse42 ? crc32c_hw(crc, buf, len) : crc32c_sw(crc, buf, len);
}

3
crc32c.h

@ -8,5 +8,4 @@
// unsigned __int64 _mm_crc32_u64 (unsigned __int64 crc, unsigned __int64 v)
// unsigned int _mm_crc32_u8 (unsigned int crc, unsigned char v)
uint32_t crc32c(uint8_t *buf, int len);
uint32_t crc32c_zero4(uint8_t *buf, int len);
uint32_t crc32c(uint32_t crc, const void *buf, size_t len);

Loading…
Cancel
Save