Ext4 vs XFS

Copy kernel source (from SSD with warm cache)

HDD: WD Scorpio Black 2.5" 750GB 7200rpm

• xfs 1 thread: 12.348s
• xfs 4 threads: 65.883s
• ext4 1 thread: 7.662s
• ext4 4 threads: 33.876s

FS-Mark 3.3, creating 1M files

HDD: WD Scorpio Black 2.5" 750GB 7200rpm

sysbench random read/write 16K in 8M files

HDD: WD Scorpio Black 2.5" 750GB 7200rpm

sysbench random read/write 16K in 16K files

HDD: WD Scorpio Black 2.5" 750GB 7200rpm

filebench fileserver, dirty_ratio=1%

• HDD: WD VelociRaptor WD6000HLHX, 10000rpm
• fileserver test is read whole file + append + write whole file test ran on 10000 files in X threads
• filebench fails to run fileserver test with O_DIRECT, so I tried to "disable" page cache using dirty_ratio=1% and ran tests like this:

echo 1 > /proc/sys/vm/dirty_ratio
echo 0 > /proc/sys/vm/dirty_bytes
echo 0 > /proc/sys/kernel/randomize_va_space
for i in 1 2 4 8 16 32 50 64; do
    echo
    echo "== $i threads =="
    echo
    echo 1 > /proc/sys/vm/drop_caches
    sync
    filebench <<EOF
load fileserver
set \$dir=/media/sdd
set \$nthreads=$i
run 30
EOF
done
echo 20 > /proc/sys/vm/dirty_ratio

filebench fileserver, dirty_ratio=20%

• HDD: WD VelociRaptor WD6000HLHX, 10000rpm
• Same test but ran with default 20% dirty_ratio setting. It's clearly seen that the system was using page cache extensively.